SEPARATING AGENT FOR MOLDS FOR THERMOPLASTICS AND THERMOSETES

Product detailed description

It can be used up to a temperature of +120°C
Significantly reduces failures
Physiologically safe
Easy washing
Possible post-processing of injected parts, such as printing and metallization, etc.
Slight deformation of injected parts
Does not contain silicone
Warning
Store the product in a dry place at a room temperature of 20°C. The shelf life is 24 months.

The instructions for use are recommendations based on the tests we have performed and our experience. Do your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any responsibility for the outcome of a particular application.

Area of ​​use
For thermoplastics and thermosets

Instructions
Briefly and evenly apply the product to the open metal forms. Since solvents evaporate quickly, spray presses can be started immediately after spraying. A fine atomizer injects the preparation even into narrow openings so that all parts of the metal forms are treated.

Warning: Do not apply to hot surfaces (T ≥ 50°C)!