ANTI-HOLOGRAM POLISH P30 PLUS

Product detailed description

Polish with a high-gloss finish for the permanent removal of streaks and holograms on dark vehicle paints
Unique powder consistency made of aluminum oxide
Gentle removal with a contemporary unique mirror shine
Easily removes sanding marks from P3000 grit
Thick consistency

The polish does not splash
Economical
A little dustiness
It can be applied manually and by machine

Does not contain silicones

Warning
Due to its chemical composition, this polish is safe when used as directed.

Recommended wheel: Orange polishing wheel or lambskin cover

In order to achieve optimal surface quality without micro-scratches, Anti-Hologram Polish Plus must not be combined with other polishes or solvents. Failure to follow these instructions will void the warranty.

At a temperature of 15-25°C, the original containers can be stored for 24 months. Protect containers from frost and direct sunlight during storage and transport.

The instructions for use are recommendations based on the tests we have performed and our experience. Do your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any responsibility for the outcome of a particular application.

Area of ​​use
Lacquered surfaces in the automotive, marine or wood industry. (solvent-based paints, single-component and multi-component systems, water-based paints, powder coatings, colorless scratch-resistant varnishes). It is not suitable for matte varnishes.

Instructions
Shake the bottle thoroughly before use.

Apply an even layer of polish to the painted surface with a soft polishing cloth or polishing sponge and polish in a circular motion. Remove the remains of the polish with a microfiber cloth.

Mechanically:

Moisten the surface of the polishing wheel evenly with the paste and apply a small amount to the surface to be polished. Place the polishing disc directly on the polished area and start the machine. Polish the surface with adequate pressure until sanding marks or paint imperfections are removed. Remove the remains of the polish with a microfiber cloth.